KM3P temperature controller, programmer with independent timer (available with analogue and servomotor outputs)

The KM3P is an advanced 48 x 48mm programmer/profile temperature controller with up to 8 segments and a guaranteed soak feature.

It has advanced features such as a dynamic display that changes colours depending on distance of process value from setpoint, an energy saving standby mode, configuration storage on a programming key that can then be transferred to other controllers, user calibration allowing for sensor correction, a 5 function timer and a working hours/days counter as well as a wattmeter for measuring instantaneous and integrated power consumption. It also features a customisable user interface.

The KM3P is available with an analogue output, relay/SSR output or open/close relays to drive servomotors in combustion systems.

Features:

Dimensions: 48 x 48 mm (1/16 DIN), depth 48 mm + 14 mm (terminals)
Front protection degree IP65, with gasket
Double LED display:
- Main Display: 4 digit, 3 dynamic colors (red, green and amber, h 15.5 mm)
- Secondary Display: 4 digit, green (h 7 mm)
1 input for temperature probes: tc J, K, S, R, T, J and K infrared sensors, RTD PT1000 and Pt 100 2-wire, PTC KTY81-121 (990O@25°C); NTC 103AT- 2 (10k@25°C), for mV signals 0/12 ... 60 mV or normalized signals 0/4 ... 20 mA, 0/1 ... 5 V, 0/2 ... 10 V
Accuracy: ± 0.5% of span ± 1 digit; tc S ± 1% of span ± 1 digit
1 or 2 digital inputs for free voltage contacts, depending on configuration code of the instrument (second digital input is an alternative to OUT4)
Power supply: 24 VAC / VDC ± 10%, 100 ... 240 VAC / VDC (-15% / +10%)>
-Frequency: 50/60 Hz
Power consumption: 7 VA max.
Outputs:
-OUT1: Relay SPST-NO 4A/240 Vac or in tension to drive SSR 13V @ 1mA max, 10.5 min @ 15 mA ± 10% or analogue galvanically isolated 0/4... 20 mA, 0/2... 10V
-OUT2: Relay SPST-NO 2A/240 Vac or in tension to drive SSR 13V @ 1mA max, 10.5 min @ 15 mA ± 10%
-OUT3: Relay SPST-NO 2A/240 Vac or in tension to drive SSR 13V @ 1mA max, 10.5 min @ 15 mA ± 10%
-OUT4 (programmable): voltage to drive SSR 13V @ 1mA max, 10.5 min @ 15 mA ± 10% or power transmitter, or digital input
SERVOMOTOR drive
3 configurable alarms as absolute, deviation and band
4 selectable set points
Serial Communications: TTL (standard) + RS 485 (optional) isolated, MODBUS RTU (JBUS)
PID control with single or double action with overshoot control, ON/OFF, ON/OFF Neutral Zone, Auto-tuning, Self-tuning
Programmer 8 segments with guaranteed soak
Independent timer with 5 operating modes
EVOgreen function: standby mode of display (selectable)
Wattmeter for calculation of the instantaneous power and energy consumed
Hour counters: a cumulative non-erasable counter and a second counter with resettable alarm
Connections: 16 screw terminals 2.5 mm² (AWG14 AWG22...) fixed, removable or clamp type

Manufacturer: Ascon Technologic

Brochure Instruction manual

KM5P temperature controller, programmer with with 96 segments over 8 programs (available with analogue and servomotor outputs)

The KM5P, the latest development in the Kube series of temperature controllers, is an advanced 48 x 48mm programmer/profile temperature controller with up to 96 segments
over 8 programs.

It has all the advanced features found in the Kube range such as a dynamic display that changes colours depending on distance of process value from setpoint, an energy saving standby mode, configuration storage on a programming key that can then be transferred to other controllers, and user calibration allowing for sensor correction. It also features a a customisable user interface.

The KM5P is available with an analogue output, relay/SSR output or open/close relays to drive servomotors in combustion systems.

Features:

Dimensions: 48 x 48 mm (1/16 DIN), depth 48 mm + 14 mm (terminals)
Front protection degree IP65, with gasket
Double LED display:
- Main Display: 4 digit, 3 dynamic colors (red, green and amber, h 15.5 mm)
- Secondary Display: 4 digit, green (h 7 mm)
1 input for temperature probes: tc N, J, K, S, R, T, J and K infrared sensors, RTD PT1000 and Pt 100 2-wire, PTC KTY81-121 (990O@25°C); NTC 103AT- 2 (10k@25°C), for mV signals 0/12 ... 60 mV or normalized signals 0/4 ... 20 mA, 0/1 ... 5 V, 0/2 ... 10 V
Accuracy: ± 0.5% of span ± 1 digit; tc S ± 1% of span ± 1 digit
1 or 2 digital inputs for free voltage contacts, depending on configuration code of the instrument (second digital input is an alternative to OUT4)
Power supply: 24 VAC / VDC ± 10%, 100 ... 240 VAC / VDC (-15% / +10%)>
-Frequency: 50/60 Hz
Power consumption: 7 VA max.
Outputs:
-OUT1: Relay SPST-NO 4A/240 Vac or in tension to drive SSR 13V @ 1mA max, 10.5 min @ 15 mA ± 10% or analogue galvanically isolated 0/4... 20 mA, 0/2... 10V
-OUT2: Relay SPST-NO 2A/240 Vac or in tension to drive SSR 13V @ 1mA max, 10.5 min @ 15 mA ± 10%
-OUT3: Relay SPST-NO 2A/240 Vac or in tension to drive SSR 13V @ 1mA max, 10.5 min @ 15 mA ± 10%
-OUT4 (programmable): voltage to drive SSR 13V @ 1mA max, 10.5 min @ 15 mA ± 10% or power transmitter, or digital input
SERVOMOTOR drive
3 configurable alarms as absolute, deviation and band
4 selectable set points
Serial Communications: TTL (standard) + RS 485 (optional) isolated, MODBUS RTU (JBUS)
Communication speed: 2400 ... 38400 baud
PID control with single or double action with overshoot control, ON/OFF, ON/OFF Neutral Zone, Auto-tuning, Self-tuning
Programmer 8 segments with guaranteed soak
Independent timer with 5 operating modes
EVOgreen function: standby mode of display (selectable)
Wattmeter for calculation of the instantaneous power and energy consumed
Hour counters: a cumulative non-erasable counter and a second counter with resettable alarm
Connections: 16 screw terminals 2.5 mm² (AWG14 AWG22...) fixed, removable or clamp type

Manufacturer: Ascon Technologic

Brochure

Instruction manual

KX3P temperature controller, programmer with independent timer (available with analogue and servomotor outputs)

The KX3P is an advanced 48 x 48mm programmer/profile temperature controller with up to 8 segments and a guaranteed soak feature.

It has advanced features such as a dynamic display that changes colours depending on distance of process value from setpoint, an energy saving standby mode, configuration storage on a programming key that can then be transferred to other controllers, user calibration allowing for sensor correction, a working hours/days counter as well as a wattmeter for measuring
instantaneous and integrated power consumption. It also features a customisable user interface.

The KX3P is available with an analogue output, relay/SSR output or open/close relays to drive servomotors in combustion systems.

Features:

Dimensions: 48 x 96 mm (1/8 DIN), depth 76 mm
Front protection degree IP65, with gasket
Double LED display:
- Main Display: 4 digit, 3 dynamic colors (red, green and amber, h 15.5 mm)
- Secondary Display: 4 digit, green (h 7 mm) + 20-segment bargraph
1 input for temperature probes: tc J, K, S, R, T, J and K infrared sensors, RTD PT1000 and Pt 100 2-wire, PTC KTY81-121 (990O@25°C); NTC 103AT- 2 (10k@25°C), for mV signals 0/12 ... 60 mV or normalized signals 0/4 ... 20 mA, 0/1 ... 5 V, 0/2 ... 10 V
Accuracy: ± 0.5% of span ± 1 digit; tc S ± 1% of span ± 1 digit
1 or 2 digital inputs for free voltage contacts, depending on configuration code of the instrument (second digital input is an alternative to OUT4)
Power supply: 24 VAC / VDC ± 10%, 100 ... 240 VAC / VDC (-15% / +10%)>
-Frequency: 50/60 Hz
Power consumption: 7 VA max.
Outputs:
-OUT1: Relay SPST-NO 4A/240 Vac or in tension to drive SSR 13V @ 1mA max, 10.5 min @ 15 mA ± 10% or analogue galvanically isolated 0/4... 20 mA, 0/2... 10V
-OUT2: Relay SPST-NO 2A/240 Vac or in tension to drive SSR 13V @ 1mA max, 10.5 min @ 15 mA ± 10%
-OUT3: Relay SPST-NO 2A/240 Vac or in tension to drive SSR 13V @ 1mA max, 10.5 min @ 15 mA ± 10%
-OUT4 (programmable): voltage to drive SSR 13V @ 1mA max, 10.5 min @ 15 mA ± 10% or power transmitter, or digital input
SERVOMOTOR drive
3 configurable alarms as absolute, deviation and band
4 selectable set points
Serial Communications: TTL (standard) + RS 485 (optional) isolated, MODBUS RTU (JBUS)
Communication speed: 2400 ... 38400 baud
PID control with single or double action with overshoot control, ON/OFF, ON/OFF Neutral Zone, Auto-tuning, Self-tuning
Programmer 8 segments with guaranteed soak
Independent timer with 5 operating modes
EVOgreen function: standby mode of display (selectable)
Wattmeter for calculation of the instantaneous power and energy consumed
Hour counters: a cumulative non-erasable counter and a second counter with resettable alarm
Connections: 16 screw terminals 2.5 mm² (AWG14 AWG22...) fixed, removable or clamp type

Manufacturer: Ascon Technologic

Brochure Instruction manual

K30 DIN rail mounting temperature controller with mini-programmer, wattmeter and independent timer functions

The K30 is an advanced DIN rail mount temperature controller that can also be configured as a programmer/profile controller. With a width on the DIN rail of 27.8mm, the K30 temperature controller is ideal for high-density multi-loop systems.

The K30 offers an economical alternative to PLC-based multi-loop temperature control systems with simple configuration, low cost and the ability to connect to HMIs. Controller configuration can be stored conveniently on the A01 key. Combined with plug-in terminal blocks, this ensures rapid replacement in the field.

Two communications ports are provided on the K30-- one TTL and one RS485. The TTL port can be connected to the P30 or P32 user interfaces whilst the RS485 can be connected to SCADA systems,
supervisory PLCs or HMIs.

The K30 temperature controller also features user calibration allowing for sensor correction, a 4-function timer and a working hours/days counter, as well as a wattmeter for measuring instantaneous and integrated power consumption.

Features:

Universal input for TC, RTD, PTC, NTC, mA or V
2 independent serial interfaces for simultaneous communications with a supervisor and a remote panel
Up to 5 digital outputs: one SSR output (standard) and up to 4 relay or SSR outputs
User Calibration
Heat/cool PID Control with overshoot control, self-tune and 2 autotuning algorithms
8-segment programmer function with events recovery, 2 events and guaranteed soak
Independent timer with 4 functioning modes
Wattmeter for calculating instantaneous power and energy used
Counter for days and hours worked with programmable threshold for programmed maintenance
Parameter sequence freely programmable
Startup delay function
Ramp to set point change
Soft start

Manufacturer: Ascon Technologic

Brochure

Instruction manual

Practical Control Solutions Pty Ltd

Power Electronics, Process Control, Instrumentation

Programmers (Profile Temperature and Process Controllers)

KM3P temperature controller, programmer with independent timer (available with analogue and servomotor outputs)

KM5P temperature controller, programmer with with 96 segments over 8 programs (available with analogue and servomotor outputs)

KX3P temperature controller, programmer with independent timer (available with analogue and servomotor outputs)

K30 DIN rail mounting temperature controller with mini-programmer, wattmeter and independent timer functions

Q3P 1/4 DIN programmer/ controller with 16 programs and 255 segments

KRD3 DIN rail mount mini-programmer controller