GIA420N Loop Powered Display

Features:

Input signal: 4-20 mA
Display range: -1999...+9999 digit, scale freely adjustable via buttons
Voltage load: approx. 3.5V
Switching output: open collector, electrically isolated
Display: LCD, height 10mm
Power supply: none, self-sustaining without auxiliary energy
Dimensions: 24 x 48 mm (HxW)
Manufacturer: GHM-Greisinger
Order code: 0160040005

GIA0420VO Loop Powered Display for Field Transmitters

Features:

• Designed to be mounted directly onto field transmitters
• Measurement signal retransmitted via through plug
  
• No external power supply required
• IP65 protection

Input signal: 4-20 mA
Display range: -1999...+9999 digit, scale freely adjustable via internal buttons
Display: LCD, height 10mm
Electric connection: angle connector according to DIN 43650
Manufacturer: GHM-Greisinger
Order code: 0160040008

Brochure Instruction manual

K31V Digital Indicator: 4 outputs and RS485

One configurable probe input, 2 digital inputs and up to 4 outputs. 
Independent timer with 4 functioning modes (optional). Counter for days and hours worked with programmable threshold for programmed maintenance. TTL or RS485 Modbus-RTU ports.

• Dimensions: 78 x 35 mm, depth 75.5 mm
• 1 Configurable probe input:
  - Thermocouples: J, K, R, S, T
  - PTC KTY81-121 (990 Ω @ 25 °C)
  - NTC 103AT-2 (10KΩ @ 25 °C)
  - RTD: Pt100
  - Voltage (V): 0..1 V, 0/1...5 V , 0/2...10 V
  - Voltage (mV): 0...50 mV, 0...60 mV, 12 ...60 mV
  - Current (mA): 0/4...20 mA
  - Custom linearisation and IR probes (J.K type)
  -Overall accuracy: ± (0,5 % span ± 1 digit @25 °C); Tc S: ± (1 % span ± 1 digit @ 25 °C)
• 2 digital inputs:
  - Free Voltage
  -Keyboard (Mechanical, 4 multifunction keys)
• Up to 4 Digital outputs:
  OUT1
  - RELAY SPDT, 8A
  - SSR Drive
  OUT2
  - RELAY SPDT, 8A
  - SSR Drive
  OUT3/OUT4
  - RELAY SPST-NO, 5A
  - SSR Drive
  OUT5(Note1)
  - SSR Drive 0...5Vdc, ±20%, 30 mA max
• Power supply:
  - 12 VAC/VDC
  - 24VDC/VAC
  - 100… 240 Vac (50/60 Hz)
  Transmitter power supply: 10 V DC (±10%), 20 mA max.
  OUT5, SSR output available if transmitter power supply is not used.
  
• Alarms:
  -Up to 3 configurable alarms + loop break alarm.
  
• Communication on TTL port to:
  - Universal programming key
  - Remote display
  - RS 485 serial interface
  - RS 485 port with ModBus RTU protocol (optional)
  
• Programming/configuration tools:
  - Configurable parameter level “Promotion”
  - Configuration software available for PC
  
• Connections
  -Communication port connection
  -5 Pole TTL Port
  -Signals connection
  -24 poles 2.5 mm² screw terminals block
  -Front protection: IP 65 (with gasket) according to EN 60070-1 for indoor use
  
• Display and indicators:
  -1 display line, 4 digit, h: 12 mm, red colour, 3 LED Bargraph
  
• Connectable to:
  - Programming key A01 for PC connection, backup and other functions
  - SCADA for monitoring, traceability and remote management
  - DX and DY gateways for remote monitoring

Manufacturer: Ascon Technologic

Instruction manual

K38V Digital Indicator: 1 input / 2 outputsHeading Level 2

One temperature probe input and up to 2 outputs. Independent timer with 4 functioning modes (optional). Counter for days and hours worked with programmable threshold for programmed maintenance. 

• Dimensions: 78 x 35 mm, depth 75.5 mm
• 1 temperature probe input:
  - Thermocouples: J, K, R, S, T
  - PTC KTY81-121 (990 Ω @ 25 °C)
  - NTC 103AT-2 (10KΩ @ 25 °C)
  - RTD: Pt100
  - Voltage (V): 0..1 V, 0/1...5 V , 0/2...10 V
  - Voltage (mV): 0...50 mV, 0...60 mV, 12 ...60 mV
  - Current (mA): 0/4...20 mA
  - Custom linearisation and IR probes (J.K type)
  Overall accuracy: ± (0,5 % span ± 1 digit @25 °C); Tc S: ± (1 % span ± 1 digit @ 25 °C)
• Keyboard: Mechanical, 4 multifunction keys
  
• Up to 2 outputs:
  OUT1: RELAY SPST-NO, 8A or SSR Drive
  OUT2: RELAY SPST-NO, 8A or SSR Drive
• Power supply:
  - 12 VAC/VDC
  - 24VDC/VAC
  - 100… 240 Vac (50/60 Hz)
  Transmitter power supply: 10 V DC (±10%), 20 mA max.
  OUT5, SSR output available if transmitter power supply is not used.
  
• Alarms:
  - Up to 2 configurable alarms + loop break alarm
• Communication on TTL port to:
  - Universal programming key
  - Remote display
  - RS 485 serial interface with ModBus RTU protocol (optional)
• Programming/configuration tools:
  - Configurable parameter level “Promotion”
  - Configuration software available for PC
• Connections:
  -Communication port connection
  -5 Pole TTL Port
  -Connection: 12 poles 2.5 mm² screw terminals block
  -Front protection: IP 65 (with gasket) according to EN 60070-1 for indoor use
• Display and indicators:
  -1 display line, 4 digit, h 12 mm, red or blue colour
  -3 LED Bargraph
• Connectable to:
  - Programming key A01 for PC connection, backup and other functions
  - SCADA for monitoring, traceability and remote management
  - DX and DY gateways for remote monitoring
  

Manufacturer: Ascon Technologic

Instruction manual

J1 5-digit Configurable Display Colour Indicator

One universal input (IN1), up to 2 alarm outputs. Display and value indication inclusive of peak and valley and value hold. RS 485 port with ModBus RTU Protocols (optional). One display, 5 digits (h: 15.5 mm), configurable green or red colour.

• Dimensions: 96 x 48 mm, depth 110 mm (1/8 DIN)
• 1 Main Input:
  - Thermocouples: L, J, T, K, S, R, B, N, E, Ni-NiMo, W3, W5
  - RTD: Pt100
  - Voltage (mV):0/10...50 mV
  - Current (mA): 0/4...20 mA (with 2.5 Ω shunt resistor)
  - Custom linearisation and IR probes (J.K type)
  Accuracy : 0.25% ±1 digit (probes) or 0.1% ±1 digit (mA or mV)
  
• Keyboard: Mechanical
  3 multifunction keys + 1 dedicated for alarm acknowledge
• Process outputs:
  1 High level analogue output: (optional)
  - For PV retransmission
  - Current (mA): 0/4...20 mA
  Up to 2 optional outputs:
  OUT1: RELAY SPDT, 2A/250Vac
  OUT2: RELAY SPST-NO, 2A (250VAC)
  
• Power supply:
  - 24VDC/VAC
  - 100… 240 Vac (50/60 Hz)
  Transmitter power supply: 24 Vdc ±20%, 30 mA Max
  
• Alarms:
  - Up to 2 configurable alarms
  - ISA-A Acknowledge function
• Communication and programming:
  -Interfaces RS 485 port with ModBus RTU and J-bus (slave) protocols (optional)
  
• Programming/configuration tools:
  - Code selection
  - Easy to use front interface for configuration
  - Configuration software available for PC
• Connections:
  36 poles 5.5 mm² screw terminals block
  
• Protection factor: IP 65 front protection
  
• Display and indicators:
  -1 display, 5 digits, h: 15.5 mm, configurable green or red colour
  -4 Alarm and 3 DI LED indicators
• Connectable to:
  - Any controller from Ascon Tecnologic range with the appropriate I/Os
  - SCADA for monitoring, traceability and remote management
  - DX and DY gateways for remote monitoring

Manufacturer: Ascon Technologic

Brochure Instruction manual

J3 5-digit Configurable Display Colour Indicator

One universal input (IN1), one auxiliary input (IN2), up to 4 optional outputs including retransmission output. Display indication includes calculated value (CIN) from IN1 and IN2, peak and valley indication and hold/temporized indication. RS 485 port with ModBus RTU Protocols (optional). One display, 5 digits (h: 15.5 mm), configurable green or red colour.

• Dimensions: 96 x 48 mm, depth 110 mm (1/8 DIN)
  
• Process inputs:
  -1 Main Input IN1
  -- Thermocouples: L, J, T, K, S, R, B, N, E, Ni-NiMo, W3, W5
  -- RTD: Pt100
  -- Voltage (mV):0/10...50 mV
  -- Current (mA): 0/4...20 mA (with 2.5 Ω shunt resistor)
  -- Custom linearisation and IR probes (J.K type)
  - Accuracy : 0.25% ±1 digit (probes) or 0.1% ±1 digit (mA or mV)
  -- Auxiliary input IN2 (Optional)
  -- Voltage (V): 0/1...5 V, 0...10V
  -- Current (mA): 0/4...20 mA
  -- Resolution: 16 Bit
  - 3 digital inputs
  -- NPN
  -- TTL
  -- Free Voltage
  
• Keyboard: Mechanical (3 multifunction keys + 1 dedicated for alarm acknowledge)
• Process outputs:
  -1 high level analogue output:
  -- Current (mA): 0/4...20 mA
  -Up to 4 optional outputs:
  --OUT1
  --- RELAY SPDT, 2A/250Vac
  --OUT2
  ---RELAY SPST-NO, 2A (250VAC)
  --OUT3
  --- RELAY SPST-NO, 2A (250VAC)
  --OUT4
  --- RELAY SPST-NO, 2A (250VAC)
  --- SSR Drive 0...5Vdc, ±20%, 30 mA Max
  
• Power supply:
  - 24VDC/VAC
  - 100… 240 Vac (50/60 Hz)
  Transmitter power supply: 24 Vdc ±20%, 30 mA Max
• Functions:
  -Calculated value (CIN) Selectable between
  -- IN1 or IN2
  -- IN1 + IN2
  -- IN1 – IN2
  -- IN1 * IN2
  -- IN1/IN2
  -- (IN1 + IN2)/2 (average)
  -- MAX (IN1, IN2) (maximum value)
  -- Min (IN1, IN2) (minimum value)
  -Display indication of :
  -- Main input IN1
  -- Auxiliary input IN2
  -- Calculated Value CIN
  -- Peak and Valley indication
  -- Hold and temporized indication
• Alarms:
  - Up to 4 configurable alarms
  - ISA-A Acknowledge function
  
• Communication and programming:
  -Interfaces:
  -- RS 485 port with ModBus RTU and J-bus (slave) protocols (optional)
  -Programming/configuration tools:
  -- Code selection
  -- Easy to use front interface for configuration
  -- Configuration software available for PC
• Connections:
  -Signals connection
  -36 poles 5.5 mm² screw terminals block
  -Protection factor : IP 65 front protection
• Display and indicators:
  -1 display, 5 digits, h: 15.5 mm, configurable green or red colour
  -4 Alarm and 3 DI LED indicators
  
• Connectable to:
  - Any controller from Ascon Tecnologic range with the appropriate I/Os
  - SCADA for monitoring, traceability and remote management
  - DX and DY gateways for remote monitoring

Manufacturer: Ascon Technologic

Brochure Instruction manual

J5 Indicator and Transmitter with Strain Gauge Input

One high level or strain gauge input (IN1) with optional auxiliary high level input (IN2). One high level analogue output with up to 4 optional outputs including retransmission output. Automatic calibration routine, tare function for load cells. Display of IN1, IN2 or calculated value (CIN) inclusive of peak and valley and hold value. RS 485 port with ModBus RTU Protocols (optional). One display, 5 digits (h: 15.5 mm), configurable green or red colour.

• Process inputs:
  -1 Main Input IN1
  -- Voltage (V): 0/1...5 V, 0...10V
  -- Voltage (mV): 0/10...50 mV
  -- Current (mA): 0/4...20 mA
  -- Strain gauge: 350 Ω, with bridge excitation voltage: 5 V or 10 V
  Accuracy : 0.25% ±1 digit (probes) or 0.1% ±1 digit (mA or mV)
  
  -Auxiliary input IN2 (Optional)
  -- Voltage (V): 0/1...5 V, 0...10V
  -- Current (mA): 0/4...20 mA
  Accuracy : 0.1% ±1 digit: between 85...240 Vac the error is negligible
  Resolution: 16 Bit
  
  -3 digital inputs
  -- NPN
  -- TTL
  -- Free Voltage
• Keyboard: Mechanical (3 multifunction keys + 1 dedicated for alarm acknowledge)
• Process outputs
  -1 High level analogue output:
  -- Current (mA): 0/4...20 mA
  -Up to 4 Optional outputs:
  --OUT1
  --- RELAY SPDT, 2A/250Vac
  --OUT2
  --- RELAY SPST-NO, 2A (250VAC)
  --OUT3
  --- RELAY SPST-NO, 2A (250VAC)
  --OUT4
  --- RELAY SPST-NO, 2A (250VAC)
• Power supply:
  - 24VDC/VAC
  - 100… 240 Vac (50/60 Hz)
  Transmitter power supply: 24 Vdc ±20%, 30 mA Max
• Functions:
  -Calculated value (CIN) selectable between
  -- IN1 or IN2
  -- IN1 + IN2
  -- IN1 – IN2
  -- IN1 * IN2
  -- IN1/IN2
  -- (IN1 + IN2)/2 (average)
  -- MAX (IN1, IN2) (maximum value)
  -- Min (IN1, IN2) (minimum value)
  
  -Display indication of :
  -- Main input IN1
  -- Auxiliary input IN2
  -- Calculated Value CIN
  -- Peak and Valley indication
  -- Hold and temporized indication
  -- Automatic calibration routine
  -- Tare function for load cells
• Alarms:
  - Up to 4 configurable alarms
  - ISA-A Acknowledge function
• Interfaces:
  - RS 485 port with ModBus RTU and J-bus (slave) protocols (optional)
  
• Programming/configuration tools:
  - Code selection
  - Easy to use front interface for configuration
  - Configuration software available for PC
• Connections:
  -Signals connection
  -36 poles 5.5 mm² screw terminals block
  -Protection factor : IP 65 front protection
• Display and indicators
  -1 display, 5 digits, h: 15.5 mm, configurable green or red colour
  -4 Alarm and 3 DI LED indicators
• Connectable to:
  - Any controller from Ascon Technologic range with the appropriate I/Os
  - SCADA for monitoring, traceability and remote management
  - DX and DY gateways for remote monitoring

Manufacturer: Ascon Technologic

Brochure Instruction manual